Skip to main content

Tilt Doors

Tailor made to fit & match your house.

Tilt Doors

A Tilt Door is a custom made one piece overhead garage door that suits any house design, especially where you have restricted side or head room.  All Qld Roller Door Tilt Doors are made to measure & available in a wide range of styles, colours and door sizes up to 5 metres wide.

Custom Designs

Tilt Doors are available in (but not limited to) Colourbond, Panel-Lift Door or Roller Door Sheeting, Zincalume Steel, Western Red Cedar, Timber or Aluminium Battens, Plywood, Fibreglass, Mesh or Perforated Steel.  Designs include vertical, horizontal or diagonal cladding.  Qld Roller Doors also specialise in Aluminium framing which is lightweight & doesn’t rust.  Tilt Doors can be operated manually or automated for your convenience.

Tilt Door Fittings

Take advantage of our Sales Representatives knowledge of which fittings best suits your application.

Jamb or Track Type

Jamb type

Tilt Doors can be fitted with Jamb type fittings.  When fixed to the Jamb Type fitting, the door projects outside the garage door opening when in the open position.  This provides a handy canopy while you perhaps unload your car or perform some maintenance tasks.  Other advantages include the low overhead clearance needed to fit Jamb Type hardware. Doors will fit into as little as 25mm headroom above the doorway.  No ceiling fixing is required as the hardware is secured above the door jambs only.

Track Type

When fixed to a Track Type hardware, the door retracts into the garage when in the open position.  The fittings are weather sealed along the door jambs to prevent dust, water & insects from entering the garage space.  The Track Type fitting is recommended for wide and heavy doors or where a full perimeter seal is required.  Doors will fit into as little as 50mm headroom above the doorway.

With over 30 years experience in manufacturing our own Tilt Doors, Qld Roller Doors has a door to suit your home.

Tilt Door Features

  • Spring restraint to ensure spring movement is contained and eliminates the possibility of spring separation from the fitting
  • Zinc plated fittings offer greater durability, strength and resistance to corrosion
  • Springs designed to provide optimum performance
  • Minimal installation clearances enable fitting where other style doors will not
  • Weather strip seal to prevent dust, water and insects entering the garage space
  • Strengthened bearing design for greater durability over the life of the fittings
  • Robust anti-sway bracket to limit the degree of lateral movement
  • Suitable for single and double width garage openings.